System information

CONFIGURATION
1.21. SNMP configuration
To enter the $ Configuration it is possible with SNMP agent ver.1 configuration
which sends information about the router, eventually about the status of the expansion port
CNT or M-BUS.
SNMP (Simple Network Management Protocol) provides status information
about network elements such as routers or end computers.
 "!+
Community Password for access to the SNMP agent.
Contact Person who manages the router together with information how to contact this
person.
Name Designation of the router.
Location Placing of the router.
Table 40: SNMP configuration
By choosing 6  <  D it is possible to monitor binary inputs I/O
on the router.
By choosing 6=;D it is possible to monitor the expansion port
CNT inputs and outputs status.
By choosing 6;@$D and enter the Baudrate, Parity and Stop Bits
it is possible to monitor the meter status connected to the expansion port M-BUS status.
 "!+
Baudrate Communication speed.
Parity
Control parity bit:
• none – Data will be sent without parity.
• even – Data will be sent with even parity.
• odd - Data will be sent with odd parity.
Stop Bits Number of stop bit.
Table 41: SNMP configuration
Parameters Enable XC-CNT extension and Enable M-BUS extension can not be
checked together.
By choosing 6+)+ and enter the IP Address and
Period it is possible to send statistical information to the monitoring system R-SeeNet.
 "!+
IP Address IP address
Period Period of sending statistical information (in minutes)
Table 42: SNMP configuration
44