System information

CONFIGURATION
1.17. L2TP tunnel configuration
To enter the L2TP tunnels configuration, select the L2TP menu item. L2TP tunnel
allows protected connection by password of two networks LAN to the one which it looks like
one homogenous. The tunnels are active after selecting  .
 "!+
Mode L2TP tunnel mode on the router side
•  ;in the case of a server must define the start and
end IP address range offered by the server
•   ! C in case of client must define the IP address
of the server
Server IP Address IP address of server
Client Start IP
Address
Start IP address in range, which is offered by server to clients
Client End IP
Address
End IP address in range, which is offered by server to clients
Local IP Address IP address of the local side of the tunnel
Remote IP Address IP address of the remote side of the tunnel
Remote Subnet Address of the network behind the remote side of the tunnel
Remote Subnet
Mask
The mask of the network behind the remote side of the tunnel
Username Username for login to L2TP tunnel
Password Password for login to L2TP tunnel
Table 34: L2TP tunnel configuration
The changes in settings will apply after pressing the Apply button.
Fig. 38: L2TP tunnel configuration
38