System information

1. CONFIGURATION OVER WEB BROWSER

1.30 USB port conﬁguration

The USB port conﬁguration can be called up by airbrush option USB Port in menu. Con-

ﬁguration can be done, if we have USB/RS232 converter.

Item Description

Baudrate Applied communication speed.

Data Bits Number of data bits.

Parity Control parity bit:

• none – will be sent without parity

• even – will be sent with even parity

• odd – will be sent with odd parity

Stop Bits Number of stop bit.

Split Timeout Time to rupture repor ts. If you receive will identify the gap between

two characters, which is longer than the parameter value in millisec-

onds. Then all of the received data compiled and sent the message.

Protocol Communication protocol:

• TCP – communication using a linked protocol TCP

• UDP – communication using a unlinked protocol UDP

Mode Mode of connection:

• TCP server – router will listen to incoming requests about TCP

connection

• TCP client – router will connect to a TCP server on the speci-

ﬁed IP address and TCP port

Server Address In mode TCP client it is necessary to enter the Server address and

ﬁnal TCP port.

TCP Port In both modes of connection is necessary to specify the TCP port on

which the router will communicate TCP connections.

Table 69: USB port conﬁguration 1

After check Check TCP connection, it activates veriﬁcation of established TCP connection.