System information

1. CONFIGURATION OVER WEB BROWSER
Continued from previous page
SMS Description
reboot Router reboot
get ip Router send answer with IP address SIM card
Table 60: Control SMS
By choosing Enable AT-SMS protocol on expansion port 1 and Baudrate it is possible
to send/receive an SMS on the serial Port 1.
Item Description
Baudrate Communication speed expansion port 1
Table 61: Send SMS on serial PORT1 configuration
By choosing Enable AT-SMS protocol on expansion port 2 and Baudrate it is possible
to send/receive an SMS on the serial Port 2.
Item Description
Baudrate Communication speed expansion port 2
Table 62: Send SMS on serial PORT2 configuration
By choosing Enable AT-SMS protocol on TCP port and enter the TCP port it is possible to
send/receive an SMS on the TCP port. SMS messages are sent by the help of a standard AT
commands.
Item Description
TCP Port TCP port on which will be allowed to send/receive SMS messages.
Table 63: Send SMS on ethernet PORT1 configuration
1.28.1 Send SMS
After establishing connection with the router via serial inter face or Ethernet, it is possible
to use AT commands for work with SMS messages.
The following table only lists the commands that are supported by Conel’s routers. For
other AT commands is always sent OK response. There is no support for treatment of complex
AT commands, so in such a case router sends ERROR response.
AT Command Description
AT+CGMI Returns the manufacturer specific identity
AT+CGMM Returns the manufacturer specific model identity
Continued on next page
73