System information

1. CONFIGURATION OVER WEB BROWSER
In the second part of the window it is possible to set function Enable remote control via
SMS. After this it is possible to establish and close connection by SMS message.
Item Description
Phone Number 1 This control can be configured for up to three numbers. If is set
Enable remote control via SMS, all incoming SMS are processed
and deleted. In the default settings this parameter is turned on.
Phone Number 2 This control can be configured for up to three numbers. If is set
Enable remote control via SMS, all incoming SMS are processed
and deleted. In the default settings this parameter is turned on.
Phone Number 3 This control can be configured for up to three numbers. If is set
Enable remote control via SMS, all incoming SMS are processed
and deleted. In the default settings this parameter is turned on.
Table 59: Control via SMS configuration
If no phone number is filled in, then it is possible to restart the router with the help of SMS
in the form of Reboot from any phone number. While filling of one, two or three numbers
it is possible to control the router with the help of an SMS sent only from these numbers.
While filling of sign "*" it is possible control the router with the help of an SMS sent from every
numbers.
Control SMS message doesn’t change the router configuration. If the router is switched
to offline mode by the SMS message the router will be in this mode up to next restart. This
behavior is the same for all control SMS messages.
It is possible to send controls SMS in the form:
SMS Description
go online sim 1 Switch to SIM1 card
go online sim 2 Switch to SIM2 card
go online Switch router in online mode
go of fline connection termination
set out0=0 Set output I/O connector on 0
set out0=1 Set output I/O connector on 1
set out1=0 Set output expansion port XC-CNT on 0
set out1=1 Set output expansion port XC-CNT on 1
set profile std Set standard profile
set profile alt1 Set alternative profile 1
set profile alt2 Set alternative profile 2
set profile alt3 Set alternative profile 3
Continued on next page
72