System information

1. CONFIGURATION OVER WEB BROWSER

Item Description

Baudrate Communication speed.

Parity Control parity bit:

• none – data will be sent without parity

• even – data will be sent with even parity

• odd – data will be sent with odd parity

Stop Bits Number of stop bit.

Table 52: SNMP conﬁguration (MBUS extension)

Parameters Enable XC-CNT extension and Enable M-BUS extension can not be checked

together.

By choosing Enable reporting to supervisor y system and enter the IP Address and Period

it is possible to send statistical information to the monitoring system R-SeeNet.

Item Description

IP Address IP address

Period Period of sending statistical information (in minutes)

Table 53: SNMP conﬁguration (R-SeeNet)

Every monitor value is uniquely identiﬁed by the help of number identiﬁer OID – Object

Identiﬁer. For binary input and output the following range of OID is used:

OID Description

.1.3.6.1.4.1.30140.2.3.1.0 Binary input BIN0 (values 0,1)

.1.3.6.1.4.1.30140.2.3.2.0 Binary output OUT0 (values 0,1)

Table 54: Object identiﬁer for binary input and output

For the expansion port CNT the following range of OID is used:

OID Description

.1.3.6.1.4.1.30140.2.1.1.0 Analogy input AN1 (range 0-4095)

.1.3.6.1.4.1.30140.2.1.2.0 Analogy input AN2 (range 0-4095)

.1.3.6.1.4.1.30140.2.1.3.0 Counter input CNT1 (range 0-4294967295)

.1.3.6.1.4.1.30140.2.1.4.0 Counter input CNT2 (range 0-4294967295)

.1.3.6.1.4.1.30140.2.1.5.0 Binary input BIN1 (values 0,1)

Continued on next page