System information

1. CONFIGURATION OVER WEB BROWSER

1.14 WiFi conﬁguration

This item is available only if the router is equipped with a WiFi module.

The form for conﬁguration of WiFi network can be invoked by pressing the WiFi item in the

main menu of the router web interface. Enable WiFi check box at the top of this form is used

to activate WiFi. It is also possible to set the following properties:

Item Description

Operating mode WiFi operating mode:

• access point (AP) – router becomes an access point to which

other devices in station (STA) mode can be connected

• station (STA) – router becomes a client station, it means that

receives data packets from the available access point (AP) and

sends data from cable connection via wiﬁ network

SSID Unique identiﬁer of WiFi network

Broadcast SSID Method of broadcasting the unique identiﬁer of SSID network in bea-

con frame and type of response to a request for sending the beacon

frame.

• Enabled – SSID is broadcasted in beacon frame

• Zero length – Beacon frame does not include SSID. Requests

for sending beacon frame are ignored.

• Clear – Each SSID character in beacon frame is replaced by 0.

However, original length is kept. Requests for sending beacon

frame are ignored.

Country Code Code of the country, where the router is used with WiFi. This code

must be entered in format ISO 3166-1 alpha-2. If country code isn’t

speciﬁed and the router has implemented no system to determine

this code, it is used "US" as default country code.

If no country code is speciﬁed or is entered the wrong country code,

then it may come a pass a breach of regulatory rules for the using of

frequency bands in the particular country.

Continued on next page