System information

2.8.1.

Connection of the PWR Supply Connector

Panel socket RJ12.

number

Signal

mark

Description

1 +UN Positive pole of DC supply voltage (10 to 30 V)

2 NC Signal not connected

3 NC Signal not connected

4 +UN Positive pole of DC supply voltage (10 to 30 V)

5 GND Negative pole of DC supply voltage

6 GND Negative pole of DC supply voltage

2.8.2.

Connection of the ETH Connector

Panel socket RJ45.

number

Signal

mark

Description

1 TXD+ Transmit Data – positive pole

2 TXD- Transmit Data – negative pole

3 RXD+ Receive Data – positive pole

4 EPWR+ DC supply voltage from the switch – positive pole

5 EPWR+ DC supply voltage from the switch – positive pole

6 RXD- Receive Data – negative pole

7 EPWR- DC supply voltage from the switch – negative pole

8 EPWR- DC supply voltage from the switch – negative pole

2.8.3.

Connection of the Connector USB

Panel socket USB-B.

number

Signal

mark

Popis

1 VCC Positive pole of 5V DC supply voltage

2 USB data -

USB data signal – negative pole

3 USB data +

USB data signal – positive pole

4 GND Negative pole of DC supply voltage

2.8.4.

Connection of the Connector PORT1

Panel socket RJ45.

Wiring of connector RJ45 is depended on using port PORT1.