System information

22
3.13. NTP Client Configuration
NTP client Configuration it can be call - up option NTP item in menu. In window it can
be define address prime (Primary NTP server Address) and secondary NTP server
(Secondary NTP server Address), by the help of which router after first interface to the GPRS
from make power supply will adjust inner o'clock.
The changes in settings will apply after pressing the Apply button.
3.14. SMS Configuration
To enter the SMS Configuration it is possible extend automatic sending SMS
messages behind power up, behind GPRS connect and at losses GPRS connection. Info is
possible send on two telephone number. Unit ID is name of the ER75i which it will send in
SMS message. Unit ID may to have arbitrary form.
Behind power up ER 75i, at introduction telephone number it come SMS in the form of:
ER75i (Unit ID) has been powered up. PLMN:xxxxx,Cell:xxxx,Channel:xx,Level:-xxdBm.
where is PLMN – number of mobile operator, Cell – number of cell, Channel – used
channel, Level – level signal
Begind GPRS connect at introduction telephone number it come SMS in the form:
ER75i (Unit ID) has established GPRS connection. IP address xxx.xxx.xxx.xxx
Behind GPRS disconnect at introduction telephone number it come SMS in the form:
ER75i (Unit ID) has lost GPRS connection.
IP address xxx.xxx.xxx.xxx