User`s guide

EXPANSION PORT MOUNTING
8
Basic delivered set of router includes:
• EDGE router,
• power supply,
• crossover UTP cable,
• external antenna,
• clips for the DIN rail,
• installation CD containing instructions.
In addition to the basics it is possible to deliver:
• one or two expansion ports RS232, RS485/RS422, ETHERNET, M-BUSD or CNT
(separation columns are in distribution),
Module can be connected only
as follows.
PORT1 RS232, RS485/422, ETHERNET, M-BUSD, CNT
PORT2 RS232, RS485/422, M-BUSD
The router standard designed for:
• mounting to a panel using through holes (only ER75i v2 version),
• possibility to be put on a work surface,
• for mounting onto a DIN rail, the clips are included.
2.3. Antenna Connection
The antenna is connected to the router using the SMA connector on the front panel.
External antennas:
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de