User`s guide

19
5.7.11. Reset
It is important to distinguish between reset and reboot the router.
Action Router behavior Invoking events
Disconnect and connect the power. Reboot Turn off and then turn on router
Press the reboot button in the web
configuration.
Reset Restore default configuration and to
reboot the router.
Press RST button.
Table 12: Description of reset and restart router
After green LED starts to blink it is possible to restore initial settings of the router
by pressing button RST on front panel. After press button RST it is restoration
of factory configuration and reboot (green LED will be on).
For pressing the RST button could be used a narrow screwdriver.
Fig. 35: Router reset
We recommend to backup your router configuration (See configuration guide),
because reset router set configuration to the initial state.
Contact www.vitriko.com [e-mail]