User`s guide

DESCRIPTION
14
2.8.2.
Connection of the ETH Connector
Panel socket RJ45.
Pin
number
Signal
mark
Description
Data flow
direction
1 TXD+ Transmit Data – positive pole Input/Output
2 TXD- Transmit Data – negative pole Input/Output
3 RXD+ Receive Data – positive pole Input/Output
4 --- ---
5 --- ---
6 RXD- Receive Data – negative pole Input/Output
7 --- ---
8 --- ---
ATTENTION! Port ETH is not POE (Power Over Ethernet) compatible!
The ETH router connection:
2.8.3. Connection of the Connector USB
Panel socket USB-B.
Pin
number
Signal
mark
Description
Data flow
direction
1 VCC Positive pole of 5V DC supply voltage
2 USB data - USB data signal – negative pole Input/Output
3 USB data + USB data signal – positive pole Input/Output
4 GND Negative pole of DC supply voltage
The USB router connection:
Router
USB
ETH
PORT1
PWR
UTP cable
Switch
Router
USB
ETH
PORT1
PWR
USB cable A-B
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de