User Manual

8
F. ROTATING COMPONENT PINCH-POINT HAZARDS
Due to the nature of the work being performed and important system
functionality, it is not possible to fully guard all rotating components.
To minimize risks operators must:
• Avoidanycontactwiththemachine’srotatingcomponents
• Followtheanchoringinstructionsdescribedinthismanual
• Followallrecommendationsinthismanualregardingtheuseofpersonal
safety equipment
G. CRUSHING INJURY WHEN LOADING OR UNLOADING ROPE OR
CONDUCTOR REELS
Operators must know the proper methods for executing these tasks and should
be trained to do them properly.
H. ELECTROSTATIC DISCHARGES
To reduce the risk presented by static electric charge build up in the ropes and
conductors during pulling operations, the machine must be properly grounded.
To minimize these risks operators must:
• Betrainedin,andapply,thepropermethodsusedtogroundthemachine
during before using the machine.
I. INHALATION ENGINE EXHAUSTING GAS
To minimize these risks operators must:
• Assumetheproperoperatingpositionduringoperationanduseappropriate
safety equipment as needed