USER'S GUIDE & SAFETY MANUAL USER'S GUIDE & SAFETY MANUAL ® Power Dart Blower ® CONDUX
Operation Procedure General Information The Condux® Power Dart® Blower uses three motors to 3 3 deliver a maximum of 300 ft ⁄min (8.5 m ⁄min) of forced air. It easily blows poly line or measuring tape over 2,000' (610 m) in up to 6" (152 mm) diameter conduit. The 110 VAC power cord uses a 30 Amp-115 VAC twist plug to adequately handle the motors’ electrical current requirements. The 220-240 VAC model is supplied with a 16 Amp-230 VAC European plug.
Fuse Replacement Procedure NOTE: Each motor has a protective fuse. They are conveniently located on the front panel’s lower right corner. 2. Pull the fuse holder out and remove the fuse. 3. Insert a new fuse into the holder. 1. 4. Push the fuse holder into its receptacle and rotate it 1⁄4 turn clockwise. Use a straight-slot screwdriver to rotate the fuse holder 1 ⁄4 turn counterclockwise.
Limited Warranty Condux International, Incorporated extends the following warranty to the original purchaser of these goods for use, subject to the qualifications indicated: Condux International, Incorporated warrants to the original purchaser for use that the goods or any component thereof manufactured by Condux International will be free from defects in workmanship for a period of one year from the date of purchase, provided such goods are installed, maintained, and used in accordance with Condux’s writte
