User Manual

6
5. Choose the correct Venturi to fit the cable being installed. Do not inst all at
this time!
6. Place the Seal Disk in Venturi Slot (See Figure 5).
7. Place conduit in the Conduit Seal and Conduit Clamp. Note placement up to
ridge on Conduit Seal (See Figure 6).
8. Close Handheld Blower and secure (See Figure 7). Tighten speedball handle
securely, but do not over tighten.
9. Plug receiving end of Conduit with a properly sized Conduit Pulling Eye (See
Figure 8).
Figure 5 Insert seal disk Figure 6 Insert duct
Figure 7 Close and tighten handle
Figure 8 Insert in n e rd uct eye