Owner's manual

8
D. OPERATIONAL CAPACITIES
•PushingForce:175lbs(778N)maximum
•PushingSpeed:300ft/min(91m/min)maximum
•CableSizes:.25"to1.13"(6mmto28.7mm)
•ConduitSizes:1/2",3/4",1",1-1/4"TRUE,1-1/4",1-1/2"SDR11&13.5,
2" and metric O.D. conduit; 10 & 12 mm, 12.7 mm, 14 mm, 16 mm,
18 mm, 25 mm, 32 mm, 36 mm, 37 mm, 40 mm, 42 mm, 44 mm, 46 mm
and 50 mm
E. ELECTRONIC CONTROL BOX
•PowerRequirements:12voltsDC
•Powerconsumptionis24Watts
•Powerconnectionmustbetoautomotivepowerpointorpowerpoint
connection on Condux hydraulic power unit
•Fusedwitha2.5ampfuse,250volt-5x20mm-GMAtype
•Displays:TotalMachineDistance,DistanceofRun,OperationalSpeed,
Errors Descriptions
•AutomaticShutdownSpeeds:300ft/min(91m/min)maximum
F. PH YSICAL SPECIFICATIONS (DOES NOT INCLUDE LEGS OR JOB BOX)
•Height 16.5"(419mm) 
•Length 30"(761mm)
•Width 14.8"(375mm)
•Weight 82lbs(37kg)
G. ACOUSTIC EMISSION
•Levelofmax.soundpressuretotheoperatorseat(ISO11202)Lep=85dB(A)
H. CATERPILLAR DRIVE SPECIFICATIONS
•Maximumpushingforce:175lbs(778N),dependingoncablediameter
•Maximumpushingspeed:300ft/min(91.5m/min)
•Maximumclampingforce:<114lbf/in(20N/mm)
•Independentpushingdrivebeltswithpolyurethanepadsprofiledforcable
0.23" (5.8 mm) to 1.13" (28.7 mm)
•Mechanicalgaschargedshockabsorberclamptopreventcablecrush.
•Side
guards.
I. CONDUIT COUPLING REQUIREMENTS
•Mustwithstandmaximumairpressureof175psi(12bar).
•Mustwithstandaxialloadingandvibration.
•Mustbescrewtype,compressiontype,orfusiontype.
•SightHolesmustbesealed.
•Mustfitsnugly.
•Conduitendsmustbecutoffsquarelyanddeburred.
•Conduitmustbefullyseatedintothecoupler.
•Couplersshouldbeinstalledinastraightsectionofconduit.
•Mustbesamesizeconduit.