Owner's manual

B. TELEPHONE CABLE PULLING EYE SECTION
With the centering tool still in the cable, measure the diameter of the cable. With this measure-
ment, select the proper pulling eye size from the chart below. The inside diameter of the pulling
eye should be slightly larger than the outside diameter of the cable you are crimping a pulling eye
onto.
Inside Dia.
of Pulling
Eye (in.)
Inside Dia.
of Pulling
Eye (mm)
4-Crimp Pulling
Eye Without
Valve Port
3-Crimp Pulling
Eye Without
Valve Port
4-Crimp Pulling
Eye With Valve
Port
3-Crimp Pulling
Eye With Valve
Port
0.95024 08911009
1.05527 08911010
1.15229 08910011089110110891901108919511
1.27732 08910012089110120891901208919512
1.40236 08910014089110140891901408919514
1.52739 08910015089110150891901508919515
1.65242 08910016089110160891901608919516
1.77745 08910017089110170891901708919517
1.90249 08910019089110190891901908919519
2.02751 08910020089110200891902008919520
2.15255 08910021089110210891902108919521
2.27732 08910022089110220891902208919522
2.40261 08910024089110240891902408919524
2.52764 08910025089110250891902508919525
2.65268 08910026089110260891902608919526
2.77770 08910027089110270891902708919527
2.90274 08910028089110280891902808919528
2.99576 08910029089110290891902908919529
3.14079 08910031089110310891903108919531
3.24583 08910032089110320891903208919532
3.37086 08910033089110330891903308919533
3.49589 08910034089110340891903408919534
3.62092 08910036089110360891903608919536
8