Instruction Manual

310
Inspection Procedure
Inspecting the swivel before and after each use ensures proper
operation throughout the job.
1. Rotate the swivel to test for proper operation.
2. Wiggle the swivel’s end to ensure there is no lateral play.
3. Make sure the clevis pin (
7
⁄8" - 1
3
⁄8" dia. swivels) or nuts and bolts
(1
5
⁄8" - 4" dia. swivels) are not damaged and are the correct size and
grade for the swivel.
4. If necessary, lubricate the swivel (see Lubrication Procedure).
Lubrication Procedure
N O T E : A l w a y s u s e s p e c i a l C o n d u x D. D r i l l g r e a s e
(Condux pn: 08190007). It is specially for mulated with a
calcium-complex soap for exclusive use in bentonite environments.
Use of lithium-based grease voids the warranty.
1. Locate and clean the grease-zerk
fitting (Figure 1).
2. Inject grease through the zerk fitting
until the old grease flushes past the
seals on the swivel’s other end.
3. Lubricate after every job. This extends
the life of the swivel and prevents swivel lockup.
4. Hand pump grease for the 7/8" swivels. Do not use a high pressure
grease gun as this will void the warranty.
Replacement Parts & Supplies
Condux offers replacement clevis pins, bolts, nuts and directional drilling
grease. Consult your Condux catalog, or see your Condux representative
for more information.
for
7
⁄8" & 1
5
⁄8" - 4"
dia. swivels only
Figure 1. Grease-Zerk Fitting
The Break-Away D. Drill
®
Swivel will fail if not
properly lubricated. Personal injury or property
damage could result.
1 1/4 (32mm) Break Away Swivels
Swivel
Part No
Break Load Replacement Pin
LBS N Part No Color
08021400 750 3336 08021405 ORANGE/VIOLET
08021500 1200 5338 08021505 BROWN/WHITE
08019400 1900 8452 08019405 VIOLET/BLACK
08019500 2000 8896 08019505 SLATE/WHITE
08019600 2500 11121 08019605 VIOLET/GREEN
08019700 3000 13345 08019705 SLATE/RED
08076100 3400 15124 08076105 BLUE/YELLOW
08019800 4000 17793 08019805 RED/YELLOW
1 5/8 (41mm) Break Away Swivels
Swivel
Part No
Break Load Replacement Pin
LBS N Part No Color
08024500 7000 31138 08024505 ORANGE
08025500 7500 33362 08025505 BLUE
08027900 8000 35586 08027905 YELLOW
08028400 8500 37810 08028405 SLATE
1 3/8 (35mm) Break Away Swivels
Swivel
Part No
Break Load Replacement Pin
LBS N Part No Color
08019900 4500 20017 08019905 SLATE/YELLOW
08021300 5000 22241 08021305 ORANGE/BLUE
08022100 5500 24465 08022105 BROWN/GREEN
08024200 6000 26689 08024205 BLUE/BROWN
08024400 6500 28913 08024405 RED/BLUE
Table 2 Continued