Specifications

Condre, Inc.

Copying with Internal Hard Drive

1. Power on the system by pressing the round button at the bottom right of the front of

the unit. This unit will run trough a self-test, displayed on the LCD screen.

Power On ..15

2. Once the self-test procedure is completed, the COPY Mode will display on the LCD

screen. Ensure that the duplicator is in the Hard Drive mode. Consult the manual for

further detail on how to change to HDD to Disc Mode.

Copy

<mode

3. To load a CD/DVD into a Hard Drive Partition, press the MODE button a few times until

the LCD screen reads Load.

Load

<mode

4. Insert the source disc into the top drive. The duplicator will scan the disc and begin to

load it onto the hard drive partition for duplication later. The LCD screen will display

numbers counting up as it loads.

Current HDD Partition Disc size in Megabyte and Duration

Drive mode. Consult

Load AA691M78:41

L0620+00 0X32 0: 16

Loading Progress Load Speed Elapsed Time

5. Once the load is completed, the LCD will flash between Load and Pass. It will also eject

the master CD/DVD. Remove the CD/DVD disc from the drive.

Pass AA691M78:41

L0691+00 0X44 2: 33

6. To begin the duplication process, press the MODE button a few times until you get

back to the Copy Mode. The HDD partition AA is now ready to be copied.

Copy AA691M78:41

<mode