Specifications

Condre, Inc.
Getting Started
Thank you...
...for choosing a Condre Standalone Tower Duplicating System from Condre, Inc.
Condre Duplicators are second to none in speed and capacity and are backed by
an intuitive interface design. We hope it will be a valuable addition to your
business for years to come.
Unpacking and Inspection
When unpacking your unit, inspect the carton and packaging material for damage.
Damages that may have occurred during shipping could cause alignment and
operation errors in your unit. Any damages found upon receiving your unit should
be reported to the dealer you purchased it from immediately.
Important!: Keep your packaging! In the event you need to ship the unit back to
the manufacturer, the product must be shipped in the manner in which it was
received. Other containers are not satisfactory and will void your warranty! If the
container is lost or destroyed, another may be purchased from the manufacturer
at a cost of $100 plus shipping. Contact your vendor for details.
Choosing a Location
Placing your unit in an unsuitable location can cause a number of problems.
Many problems can be avoided by following these guidelines.
• The unit must be placed on a flat, level surface. A tilt to the unit’s base can
cause errors in calibration during use. The surface must also be relatively
stable and resistant to bumps and jarring.
• The surface the unit is placed on must be able to hold 100+ pounds and
be resistant to bowing under such weight.
• Place the unit in a location with adequate air circulation. Closets or
cabinets are not suitable as heat build-up can cause the unit to
malfunction. Likewise, do not place the unit on or near any heat sources
such as heating vents or server racks.
• The unit must not be placed in an area with direct sunlight, excessive dust,
mechanical vibration or shock.
5