Specifications

Condre, Inc.

ain Menu:M

. Copy: This is the primary function of the duplicator. When set to Copy, the

uplicator will transfer the contents of a master disc or the

artition to any blank discs the tower input bins.

. Copy+Comp: Like the “ y th

ts of discs do not match. This function

oes not work with Audio or Video CDs (VCD). Audio or Video CDs will instead

d current hard drive

p in

B Copy” function, but followed b e Compare function

(see “Compare”)

C. Emulate: Like the “Copy” function, but nothing is actually written to the blank

discs. It is used for testing Master disc readability and hardware. Emulate

function does not work with DVD+R disc.

D. Emu+Copy: After emulation is completed and successful, the duplicator will

begin writing the actual data to the discs.

E. Load: This function is used to load a Master disc onto its current partition. A

Master must first be loaded to the hard drive before the Copy function can be

sed. u

F. Compare: This function will compare bit-for-bit the source disc and destination

iscs and will report an error if the two sed

be verified (see “Verify”).

G. Quick Erase: Allows data on CD-RW/DVD-RW will be erased.

H. Verify: Verification compares the structure of the discs in any drive against

the industry standard. This function is good for verifying that your source disc is a

suitable Master and can be read in most standard devices.

I. External: The External function is not used.

Sub-Menu:

Holding down the MODE button for 5 seconds while in the Primary Menu will

ring up the Sub Menu. Press the MODE button to cycle through the options and

. Setup: Different settings to control the duplicator’s operation. See Setup

ils.

press GO button to select.

Options for deta