Product Manual

ManualsBrandsCondor Performance ManualsFuel Transfer & LubricationCondor 50:1 Air Grease Pump, 150 PSI

INSTRUCTIONS FOR USE

50:1 AIR OPERA TED GREASE PUMP

Congratulations on your purchase of this world-class premium construction Air Operated

Grease Pump.

AIR MOTOR

AIR INLET

PUMP OUTLET

DRUM

COVER

LIFT

HANDLE

FOLLOWER

PLATE

SUCTION

TUBE

STRAINER

HIGH PRESSURE

GREASE HOSE

SWIVEL

COUPLER

OUTLET

EXTN.

GREASE

CONTROL

VALVE

TRIGGER

THUMB

SCREWS

EXHAUST

The pump comes in different configurations. Most popular forms are detailed below:

Features:

1.This is a 50:1 pump & will dispense

grease at a pressure equaling approx.

40 - 50 times the Air Inlet Pressure

2. Recommended for applications requiring

volume greasing at high pressures in

industry, workshops, farm etc.

3. Precision engineered steel pump

construction with machined Aluminum air

motor

4. CNC machined & 100% factory tested

Wetted Components *

Steel, Brass, Aluminum & Polyurethane

Intended use with :

Light & self Collapsing Grease upto

NLGI No. 2.

* Pump only . Does not include Hose Assembly &

accessories

Pump Specications:

Air Inlet ¼” (F)

Pump Outlet 1/4” (F)

Working Pressure 30-150 PSI (2-10 BAR)***

Maximum Air Pressure 150 PSI (10 BAR)***

Air Consumption 230 lt/min (61 GPM)

Discharge 1.100 kg / min (2.40 lbs / min)**

Noise Level 81 db

** Measured using NLGI No. 2 Grease at an inlet pressure of 8 BAR (1 15 PSI) & ambient temperature of 29°C

*** Only natural compressed air to be used

Select models may have dierent thread specications

Model

3574GNTP

1213GNTP

3574GNT

1213GNT

1213GNT-ND

Type

Pump only

Pump with drum cover

, follower plate,

high pressure hose, swivel, grease

control valve with extn. & coupler

Same as 1213GNT less the dolly

1220GNT-6

Same as 1213GNT less the dolly & air regulator

, follower plate,

high pressure hose, swivel, grease

control valve with extn. & coupler

For Open Head

Drum Size

25-50lbs/20kg/5gal

125lbs/50kg/16gal

25-50lbs/20kg/5gal

125lbs/50kg/16gal

Suction Tube

Length

17.5/16” (440mm)

28.3/4” (730mm)

17.5/16” (440mm)

28.3/4” (730mm)

Suction Tube

Diameter

1.1/8” (30mm)

3574GNTP

1213GNTP

Summary of content (3 pages)

PAGE 1
INSTRUCTIONS FOR USE 50:1 AIR OPERA TED GREASE PUMP 3574GNTP 1213GNTP Congratulations on your purchase of this world-class premium construction Features: 1.This is a 50:1 pump & will dispense grease at a pressure equaling approx. 40 - 50 times the Air Inlet Pressure 2. Recommended for applications requiring volume greasing at high pressures in industry, workshops, farm etc. 3. Precision engineered steel pump construction with machined Aluminum air motor 4.
PAGE 2
GETTING STARTED Before you start installing the pump, make sure the following are available 1.Clean Supply :This is one of the most important for life of your pump. Make sure air quality is very good of Air with no contaminants / moisture. This can be achieved my installing a Filter Unit in the air line , before the line is put into the Air inlet port on the Pump 2.Regulator : Since compressed air may be used at many points in your shop, air pressure in the line will keep fluctuating.
PAGE 3
TROUBLESHOOTING Sr. Nr PROBLEM CAUSES REMEDY 1. Air motor operates, but does not dispense any grease 1.Grease is too thick / too cold 1. Use NLGI No.2/ thinner grease. Store grease in a warm place 2. Replace drum. Follower plate must be able to travel all the way down freely 3. Shake the grease drum & manually force down the follower plate to remove air pockets 4. Inlet Air Pressure must at least be 60 PSI (4 BAR).Increase inlet pressure 2.