Manual

Specifications 39
8.0 Specifications
Pressure Specifications:
Pressure ranges: +- 0-28 in Hg
+- 0-387.00 in H
2
O
+ 0- 2771.0 in H
2
O
+- 0-96.00 kPa
+ 0- 100.00 PSI
Available Pressure
Calibrations: Gage and Vacuum
gage and absolute
Overall Accuracy: < ±0.05% Full Scale Max. Accuracy
statement includes all effects of linearity,
hysteresis, repeatability and ambient
temperature
Operating Temperature: +40° to +122°F (+4.4° to +50.0° C)
Storage Temperature: 0° to +185° F (–17.8° to +85°C)
Pressure Media: Dry gaseous nitrogen, or 150 PSI Max.
shop air
Internal Pressure Cylinder:
Capacity: 7.0 ft
3
N
2
@ 2216 PSIG
Volume: 80 in
3
Rating: 2216 PSIG
Test Pressure: 3360 PSIG
Material: 6061 Aluminum
Note: Some pressure cylinders may only be rated for a
working pressure of 2015 PSIG. See information located
on panel below fill port.
Pressure Supply Gage:
Size: 2-in. diameter
Range: 0–3000 PSIG
Test Pressure: 4500 PSIG
Over-pressure Rupture Disk:
Rating: 3000 PSIG, nominal
Type: Stainless steel outer case
Pressure Media Filter:
Rating: 20 microns, Test Port
Type: Field replaceable
Orion-2D Control Valve:
Type: Micro-metering with replaceable soft seat
Material: Aluminum body, clear anodized aluminum
knobs, black anodized
All other parts 300 series stainless steel
Relief Valve Type: Adjustable, atmospheric bleed
Relief Valve Setting: Adjustable to 10% above highest
calibrated pressure
Relief Valve Material: 300 series stainless steel
Internal Piping:
Tubing: 1/8" O.D., 0.030" wall thickness seamless
Cu
5/32" O.D., 0.025" wall thickness Nylon
Couplings: Brass, Swagelok and Legris type
Fill Port:
Style: Quick-disconnect.
Pressure Rating: 3000 PSIG connected, 2000 PSIG
disconnected
Material: 300 series stainless steel
Test Port:
Pressure Rating: 2000 PSIG
Material:Brass
Vent Port:
Style: 1/4" 37° AN male
Pressure Rating: 2500 PSIG
Material: Brass
Pressure Hoses:
Quantity Supplied: Two; one input, one output
Length: 5 ft. nominal, each hose
Style: Fill (input) hose
- Nylon-lined core tube with
synthetic braid, polyurethane cover. Fitted
with quick-disconnect (Brass) socket on
one end and 1/4" 37˚ female AN swivel
pressure fitting on opposite end
T
est Port (output) hose - Nylon-lined core
tube with synthetic braid, polyurethane
cover. Fitted with quick-disconnect plug
(Brass) on one end and 1/4" 37˚ female AN
swivel tube coupling on the other
Pressure Limit Control Regulator (Panel Mounted):
Type: Single stage, self-venting, bleed
Pressure Rating: 300 PSIG max. inlet
Pressure Limit Control Regulator (Chassis Mounted):
Type: Single stage, captured vent, non-bleed
Pressure Rating: 3500 PSIG max. inlet
Vacuum Control Regulator (Chassis Mounted):
Type: Single stage, self-venting, non-bleed
Pressure Rating: 300 PSI max. inlet
Internal Pressure Sensor:
Type: Bonded, metal foil strain gage, sputtered
thin-film or equivalent
Sensitivity: 3 mV/V nominal
Construction: Completely weld-sealed stainless steel
outer body and pressure cavity
Battery:
Type: Rechargeable, lead-acid gel
Nominal Voltage: 12V
Approx. Weight: 2.86 lbs
Case: Polystyrene/H.I. ABS