Owner manual

Specifications 16
4.0 Specifications
Pressure Specifications:
Pressure range: Based on vendor’s electronics
Available pressure calibrations:
Gage only, absolute only, or
gage and absolute
Overall accuracy: Based on vendor’s electronics
Operating Temperature:+40° to +110°F (+4.4° to +43.3° C)
Storage Temperature: 0° to +185° F (–17.8° to +85°C)
Pressure Media: Dry gaseous nitrogen, standard
Internal Pressure Cylinder:
Capacity: 15.2 ft
3
N
2
@ 3000 PSIG
Volume: 133 in
3
Rating: 3000 PSIG
Test Pressure: 5000 PSIG
Material: 6061 Aluminum
Pressure Supply Gage:
Size: 2-in. diameter
Range: 0–4000 PSIG
Test Pressure: 4000 PSIG
Over-pressure Rupture Disk:
Rating: 3400 PSIG, nominal
Type: Stainless steel outer case
Pressure Media Filter:
Rating: 20 microns nominal
Type: Field replaceable
Orion 2C Control Valve:
Type: Micro-metering with replaceable soft
seat
Material: Aluminum body, clear anodized
Aluminum knobs, black anodized.
All other parts 300 series stainless
steel.
Internal Piping:
Tubing: 1/8 in. O.D., 0.028 in. wall thickness,
seamless stainless steel.
Couplings: 316 stainless steel, Swagelok type
Vent Port:
Style: 1/4" 37° AN male
Pressure Rating: 3400 PSIG
Material: 316 series stainless steel
Fill Port:
Style: 1/4" 37° AN flare male
Pressure Rating: 3400 PSIG rated, 3050 PSIG
operating
Material: 316 series stainless steel
Test Port:
Pressure Rating: 5000 PSIG rated, 3000 PSIG
operating
Material: 300 series stainless steel
Pressure Hose Fittings:
Quantity Supplied: Three; one input, two test port fittings.
Style: Input fitting: 1/4" 37° female AN swivel
one end, 1/8 NPT male on the other
Test port fittings: Quick disconnect
plug (SS) on one end, 1/4" NPT female
on the other.
Input and test port hoses are supplied
by customer
Pressure Limit Control Regulator:
Type: Single stage, self-venting, non-bleed
Pressure Rating: 3000 PSIG max. inlet
Carrying Case:
Type: Aluminum case with latched cover and
handle
Material thickness: 0.090 in., nominal
Finish: Enamel paint, textured finish
Color: Gray
Control Panel:
Material: Aluminum (5052-H32)
Thickness: 0.090 in.
Finish: Gray enamel paint with black
silkscreen nomenclature
Physical Specifications:
Weight: 25 lb
Case Dimensions: Height: 11.59” (294.4 mm)
Width: 18.00” (457.2 mm)
Depth: 7.19” (182.6 mm)
Options:
PN 67248: Test port (output) 5' long hose with
quick-disconnect male hose fitting
PN 78939 Fill port (input) 5' long hose with
CGA-580 Cylinder connection fitting
and Cheat Seal Pad
PN 58483: Pressure trap (See literature sheet
58609)
PN 79423 Hose bag - will fit inside top cover
2.0"
1.5"
18.00"
11.59"
7.19"