Owner's manual

Options, Replacement Kits 67

11.0 Options, Replacement Kits

There are numerous replacement part numbers mentioned throughout manual that may be ordered.

ORION-2C and ORION-3A O-Ring Replacement Kit (data sheet # 65308)

• Fluorocarbon “Viton” (standard for ORION-3A)...........................................PN 55277

•Nitrile Buna-N (standard for ORION-2C)......................................................PN 58499

• Ethylene-Propylene.........................................................................................PN 58506

• Silicone ...........................................................................................................PN 58509

•Neoprene.........................................................................................................PN 58515

NOTE: A small coating of ﬂuorinated Krytox grease, (PN 55593), should be applied to both sides of O-ring prior

to installation.

• Pressure Trap

100 PSI full scale ranges and below (data sheet # 58621) .............................PN 58487

250, 500, 1000 or 2500 PSI full scale range (data sheet # 58609) .................PN 58483

5000 or 10000 PSI full scale range (data sheet # 58596) ...............................PN 58478

•Test Port (output) quick-disconnect male hose ﬁtting

100 PSI full scale ranges and below ..............................................................PN 60195

250, 500, 1000 or 2500 PSI full scale range...................................................PN 55394

5000 or 10000 PSI full scale range.................................................................PN 55542

Test Port (output) hose, with quick-disconnect male ﬁtting:

• 100 PSI full scale ranges and below 5’ long............ .......................................PN 60195, 55251 (1 each)

• 250, 500, 1000 or 2500 PSI full scale range 5' long ......................................PN 55279

• 250, 500, 1000 or 2500 PSI full scale range 10' long .....................................PN 55300

• 250, 500, 1000 or 2500 PSI full scale range 15' long .....................................PN 55304

• 250, 500, 1000 or 2500 PSI full scale range 20' long .....................................PN 55310

• 5000 or 10000 PSI full scale range 5' long ....................................................PN 55280

NOTE: Model may be ordered with Test Port mounted on rear of unit for additional charge.