Owner's manual

Configuration and Calibration 25
5.13.2 Port 1 Printer Menu
Table 5-12 outlines the parameters of the Port 1 Printer menu.
Port 1 Printer Modify Menu
Table 5-13 outlines the parameters of the Port 1 Printer Modify menu.
LED Display Alpha-Numeric Display Key Pressed Remarks
PORT 1 PRINTER DOWN arrow Enters Printer set-up
SET P1 AUTO PR? YES key Enters AUTO PR? menu. Use DOWN arrow
key to scroll PRINT 1 – PRINT 8
NO key Continue to BAUD/9600
BAUD 9600 UP or DOWN
arrow
Press LEFT or RIGHT arrow keys to change
the current state of the selection. 1200,
2400, 4800, 9600 or 19200
PARITY EVEN Press LEFT or RIGHT arrow keys to change
the current state of the selection. EVEN,
ODD, MARK or NONE
PORT 1 STANDARD Press LEFT or RIGHT arrow keys to change
the current state of the selection.
STANDARD, MODIFY or CUSTOM
PORT 1 MODIFY See Table 5-13 on page 25
PORT 1 CUSTOM Allocated for future use
PORT 1 EXIT ? YES key Return to menu SET-UP/PORT 1 ?. See
Table 5-11.
NO key Return to PORT 1/PRINTER
Table 5-12. Port 1 Printer Menu
LED Display Alpha-Numeric Display Key Pressed Remarks
PORT 1 MODIFY DOWN arrow Enters Modify menu
DELAY 1 AUTO UP or DOWN arrow Press LEFT or RIGHT arrow keys to change
the current state of the selection. 1/SEC,
2/SEC, 3/SEC, 4/SEC, 5/SEC or AUTO
T-D1 OFF Press LEFT or RIGHT arrow keys to change
the current state of the selection. ON,
ABOVE, BELOW or OFF
DATA 1 DISPLAY Press LEFT or RIGHT arrow keys to change
the current state of the selection. DISPLAY
or G/T/N (port 1 only). DISPLAY, G/T/N or
COMPRESS (port 2 only).
EOL 1 CR/LF Press LEFT or RIGHT arrow keys to change
the current state of the selection. CR/LF or
CR
SOT 1 STX Press LEFT or RIGHT arrow keys to change
the current state of the selection.
NONE, SOH or STX
EOT 1 NONE Press LEFT or RIGHT arrow keys to change
the current state of the selection.
EOT, ETX, FF, LF or NONE
PORT 1 EXIT ? YES key Return to menu SETUP/PORT 1 ?. See
Table 5-10 on page 24.
NO key Return to menu PORT 1/PRINTER. See
Table 5-12 on page 25.
Table 5-13. Port One Printer Modify Menu