Owner's manual

22 DLR3110 Rack Mount Digital Pressure Calibrator Manual
Figure 5-8. Conversion Set-Up Mode
5.12 Conversion Set-Up Mode Selection
To access Conversion mode see Section 5.4 on page 13. Press UP or DOWN arrow keys to step through
conversion selections. Press
LEFT or RIGHT arrow keys to change the current state of the selected conversion.
The Conversion mode may be exited at anytime by pressing the
CE key. If the CE key is pressed, the prompt Exit?
YES or NO scrolls continuously until the YES or NO key is pressed.
The following is a list of the available conversions as they appear on the alpha-numeric display:
• PSI
•KPa
• mmHG 0
•
C
•BAR
• inHg0
•
C
•mBAR
•cmH
2
O
• kg/cm
2
• inH
2
O68F
• inH
2
O4
•
C
• ftseaH
2
O
•TORR
•metrsH
2
O
•PASCAL
• mmH
2
O4
•
C
The following is a list of the inoperative conversions (allocated for future use) as they appear on the
alpha-numeric display:
• CONV.SP1
• CONV.SP2
• CONV.SP1
• CONV.SP2
CONV ?
ZERO
DISPLAY
TARE PRINT
YES
NO
CE ENTER