Operation Manual

56 Maintenance

6.4.3 Removal and installation of the steam cylinder

WARNING!

Danger of burning!

Before removal of the steam cylinder ensure the steam cylinder is empty and has cooled down, that

no more burning danger exists.

1. Loosen retaining screw on front door on the steam cylinder side of the unit using a screwdriver, then

remove the front door.

2. Free the upper hose clamp of the steam outlet hose using a screwdriver and pull the hose down-

wards from the steam connector. Then, loosen the two screws xing the heating cable plug to the

plug socket and remove heating cable plug from the plug socket.