Operation Manual
39Operating the control software
Time/Date Tab
– Date Format: With this setting you determine the desired date format.
Factory setting: DD/MM/YYYY
Options: DD/MM/YYYY or MM/DD/YYYY
– Clock Format: With this setting you determine the desired time format.
Factory setting: 12H
Options: 24H (24 hours, display 13:35) or
12H (12 hours, display: 01:35 PM)
– Contrast: with this setting you determine the desired value for the display
contrast.
Factory setting: 8
Options: 1 (weak contrast) ... 31 (strong contrast)
– Brightness: with this setting you determine the desired value for the
display brightness.
Factory setting: 52
Options: 1 (dark) ... 100 (white)
– LED Brightness: with this setting you determine the desired value for the
brightness of the operation indication LED.
Factory setting: 52
Options: 1 (weak) ... 100 (bright)
5.4.5 Communicationsettings–"Communication"submenu
In the "Communication" submenu you determine the parameters for digital communication protocols.
Remote Enable Tab
– Allow Remote Disable: with this setting you can activate ("Yes") or de-
activate ("No") remote blocking via the BMS.
Factory setting: Yes
Options: Yes (Remote blocking permitted)
No (Remote blocking not permitted)