Specifications

Table 9-1 lists the configurable interrupts for this board. The actual allocation of PCI bus
interrupts to available interrupt controller inputs will depend on both the default “Plug-and-play”
settings programmed by the PC BIOS, and the way in which the user has overridden them using
the Setup screens. When more than one PCI bus interrupt is routed to the same interrupt
controller input, that input will remain active while any of the sources connected to it are active.
PMC Expansion INTA
PMC Expansion INTB
PMC Expansion INTC
PMC Expansion INTD
PMC 1 INTA
PMC 1 INTB
PMC 1 INTC
PMC 1 INTD
PMC 2 INTA
PMC 2 INTB
PMC 2 INTC
PMC 2 INTD
Ethernet Channel 0
Ethernet Channel 1
Universe II LINT0#/VME BERR
Table 9-1 Configurable PCI Bus Interrupts
9-6 VP 110/01x
PC BIOS