Specifications
Table of Contents
1. Introduction and Overview ·················1-1
1.1 General ·························1-1
1.2 The VP 110/01x - Main Features ··················1-2
1.2.1 Central Processor ······················1-2
1.2.2 Cache Memories·······················1-2
1.2.3 Chipset··························1-2
1.2.4 SDRAM ·························1-3
1.2.5 PCI Busses ························1-3
1.2.6 EPROM ·························1-3
1.2.7 Battery Backed SRAM ·····················1-3
1.2.8 Application Flash EPROM ····················1-3
1.2.9 EIDE Controllers ·······················1-3
1.2.10 USB···························1-3
1.2.11 PMC Interface ·······················1-3
1.2.12 Ethernet Controllers ······················1-3
1.2.13 VME Interface ·······················1-3
1.2.14 Floppy Disk ························1-4
1.2.15 Serial Communication ·····················1-4
1.2.16 Keyboard & Mouse ······················1-4
1.2.17 Real Time Clock (RTC)·····················1-4
1.3 Additional Board Options ····················1-5
2. Hardware Installation ···················2-1
2.1 General ·························2-1
2.2 Unpacking and Inspection ····················2-2
2.3 Default Jumper Settings ···················2-3
2.4 Front Panel Indicators and Controls ·················2-4
2.4.1 Run LED (R) Green ······················2-4
2.4.2 POST LED (P) Yellow ·····················2-4
2.4.3 Ethernet Speed LEDs (Speed) Yellow ················2-4
2.4.4 Link/Activity LEDs (LK/ACT) Green ·················2-4
2.4.5 Battery Status LED (B) Yellow (optional) ···············2-4
2.4.6 Reset/NMI Switch ······················2-4
2.4.7 External Reset ·······················2-5
2.5 Installation of On-Board Mass Storage ················2-6
2.5.1 Hard Disk Storage Kit (AD CP1/DR1) ················2-7
2.5.2 CompactFlash Storage Kit (AD 200/001) ···············2-8
2.6 Adding or Replacing DRAM Modules ················2-9
2.7 Installing and Replacing the Battery ················2-10
2.8 Installing or Removing a PMC Module················2-12
2.9 Installing the Board in a VME Backplane ···············2-14
2.9.1 Installing the board······················2-14
2.9.2 Removing the board ·····················2-14
3. Software Installation ···················3-1
3.1 Starting up for the first time ···················3-1
3.2 Bootloading from CD-ROM ···················3-2
3.3 Installing Windows NT
®
4.0···················3-3
3.4 Installing Windows
®
2000 ····················3-4
3.5 Installing RedHat
®
Linux
®
7.2···················3-5
3.6 Using VxWorks 5.4 with Tornado 2 ·················3-6
4. Mass Storage Interfaces ··················4-1
4.1 Floppy Disk Interface ·····················4-1
4.2 EIDE Interfaces ·······················4-2
vi VP 110/01x