Specifications

6.2 Keyboard and Mouse Ports
A single 8-way x 0.1 inch, board mounted header provides connections for a PC keyboard and a
PS/2 mouse. The pin-out of the front panel connector is detailed in Section A.5.4.
Power for the keyboard and mouse interfaces is protected by a 0.75A self-resetting current
limiting circuit. To reset this circuit power the board off, remove and replace the faulty keyboard
or mouse device, then power up again.
NOTE External devices that derive power from the keyboard/mouse interface may be
used provided that the total current taken by all devices is less than 0.75A.
6-2 VP 110/01x
Other Interfaces