Specifications

1.3 Additional Board Options
Two on-board mass storage options are available, namely;
l
A 2.5” EIDE hard disk drive of at least 10 Gbyte capacity.
l
A CompactFlash carrier that supports the IBM
®
Microdrive
™
.
Only one of these mass storage options may be fitted at a time. Refer to the VP 110/01x
datasheet for ordering information.
The VP 110/01x board may be ordered with one of a few different VME P2 and P0 connector
breakout or adapter modules. Appendix B gives details of all these breakout modules.
Table 1-1 summarizes the interfaces available using each of these VME P2 breakouts.
Breakout
VME P2 Connector Pins EIDE Floppy USB PMC Site 1 Rear I/O (P2) PMC Site 2 Rear I/O (P0)
AD VP2/004-10 96 4
AD VP2/004-20 160 4444
AD VP2/005-00 160 44444
Table 1-1 VME P2 Breakout Interfaces
Introduction and Overview
VP 110/01x 1-5