Specifications

A.5.3 PMC I/O Connector (P0) Pin-outs
Some VP 110/01x variants are fitted with a P0 connector. This is a 95-way (5-row x 19-position)
IEC 61076-4-101 2mm pitch connector. It carries all 64 I/O signals from PMC Site 2. The pin
assignments conform to the P4V0-64 mapping defined in the ANSI/VITA 35-2000 standard and
are shown below.
Position Row F Row E Row D Row C Row B Row A
1GND-----
2GND-----
3GND-----
4 GND I/O 1 I/O 2 I/O 3 I/O 4 I/O 5
5 GND I/O 6 I/O 7 I/O 8 I/O 9 I/O 10
6 GND I/O 11 I/O 12 I/O 13 I/O 14 I/O 15
7 GND I/O 16 I/O 17 I/O 18 I/O 19 I/O 20
8 GND I/O 21 I/O 22 I/O 23 I/O 24 I/O 25
9GND-----
10GND-----
11GND-----
12 GND I/O 26 I/O 27 I/O 28 I/O 29 I/O 30
13 GND I/O 31 I/O 32 I/O 33 I/O 34 I/O 35
14 GND I/O 36 I/O 37 I/O 38 I/O 39 I/O 40
15 GND I/O 41 I/O 42 I/O 43 I/O 44 I/O 45
16 GND I/O 46 I/O 47 I/O 48 I/O 49 I/O 50
17 GND I/O 51 I/O 52 I/O 53 I/O 54 I/O 55
18 GND I/O 56 I/O 57 I/O 58 I/O 59 I/O 60
19 GND I/O 61 I/O 62 I/O 63 I/O 64 -
Table A-3 PMC I/O Connector (P0) Pin-outs
NOTE This connector is a build time option and is not available on all variants
Specifications
A-6 VP 110/01x