Specifications

A.2 Environmental Specification
A.2.1 Temperature Range
Operating ........0to+55ºC @ 400LFM air flow
Storage .........-40to+70ºC
NOTE If the on-board hard disk drive option is fitted, the operating temperature range will
be restricted to +5 to +55ºC and the storage temperature range will be restricted to
-40 to +65ºC.
NOTE If the battery is fitted, the storage temperature range will be restricted to 0 to
+70ºC. This is because the Super I/O device is partially operational when the
battery is connected. The battery life will be reduced by storage at high
temperatures due to increased self-discharge. It is therefore recommended that
the battery be removed during storage.
A.2.2 Humidity
Operating ........10%to90%non-condensing
Storage .........10%to90%non-condensing
A.3 Dimensions
Height .........23.3cm
Depth .........16.0cm
Width .........2.0cm
Weight .........500g (without Mass Storage Kit fitted)
A.4 Electrical Specification
A.4.1 Power Supply Requirements
VOLTAGE (V) PROCESSOR REGULATION CURRENT
SPEED (Typical)
+5.0V 1.2GHz +5%, -3% 8.0A
+5.0V 800MHz +5%, -3% 6.1A
+12.0V ALL +/-5% 0.0A
-12.0V ALL +/-10% 0.0A
NOTE This is for a Pentium III-M CPU with 1 Gbyte SDRAM and no Mass Storage Kit
fitted.
NOTE +/- 12V supplies are provided for the PMC interface. These supplies do not need
to be present if the PMC module does not require them. Current requirements will
be those of the fitted PMC module.
A-2 VP 110/01x
Specifications