Specifications

11.2.31 Test 58: IDE Fixture Test
This BIST checks the operation of the on-board IDE controller by means of an external test
fixture. This fixture is identified as “TF0169”.
There are no sub-commands or parameters relevant to this test.
This fixture tests the following features of the IDE interface:
l
Register Address Lines
l
Chip Select Lines
l
Data Lines
l
DMA Channels
Error codes:
The error codes for this BIST are returned as a range of error codes, the least significant digital
representing the point at which it failed in the test sequence. For example, 0436h identifies that
DMA failed during the transfer of byte 6.
040yh - Register Test Failed on Byte y
041yh - Chip Select Failed on Byte y
042yh - Data Test Failed on Byte y
043yh -DMA Failed on Byte y
04FFh - Test Fixture Not Found
VP 110/01x 11-15
VSA Mode Diagnostics