Technical Specifications

TECHNICAL DATA
CRM-01
CONCROBIUM
®
MOLD CONTROL
®
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 800∙466∙7126
www.conrobium.com
Form: ARJ-1882
Rev.: 072419
PHYSICAL PROPERTIES
MOLD CONTROL
Color
Colorless
Clarity
Clear
Odor
Odorless
pH Range
11.1-11.5
VOC (Weight %)
0%
Practical Coverage
Varies according to surface and application method
Aerosol: up to 150 sq. ft.
Manual/Compression Sprayer: 350-400 sq. ft. per gallon depending on sprayer type
Fogging: approximately 1,400 sq. ft. total surface coverage (walls, floors, ceiling) per
1/2 gallon (the equivalent to a 20' x 20' room with 8 foot ceiling)
NOTE: Expect reduced coverage on absorbent surfaces such as fabrics, carpet,
lumber and unpainted drywall.
Weight
Per Gallon
8.5 lbs.
Per Liter
1.0 kg
Dwell Times (where applicable)
Allow to dry
Boiling Range
212°F (100°C)
Vapor Density
Heavier than air
Shelf Life
NA
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.