SDS

Concrobium Mold Stain Eraser

Revision Date 21-Dec-2016

_____________________________________________________________________________________________

Page 4 / 11

5. FIRE-FIGHTING MEASURES

Suitable Extinguishing Media

Use water. Do not use dry chemicals or foams. CO

or Halon may provide limited control. Flood fire area with water from a

distance. Move containers from fire area if you can do it without risk. Cool containers with flooding quantities of water until well

after fire is out.

Unsuitable extinguishing media

CAUTION: Use of water spray when fighting fire may be inefficient.

Specific hazards arising from the chemical

These substances will accelerate burning when involved in a fire. Some may decompose explosively when heated or involved in a

fire. May ignite combustibles (wood paper, oil, clothing, etc.). Runoff may create fire or explosion hazard.

Uniform Fire Code

Oxidizer: Class 1--Solid

Irritant: Solid

Explosion Data

Sensitivity to Mechanical Impact

None.

Sensitivity to Static Discharge

None.

Protective equipment and precautions for firefighters

Do not move cargo or vehicle if cargo has been exposed to heat. Fight fire from maximum distance or use unmanned hose holders

or monitor nozzles. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor; if this

is impossible, withdraw from area and let fire burn.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

Personal precautions

Avoid contact with skin, eyes or clothing. Use personal protective equipment as required.

Other Information

DO NOT GET WATER INSIDE CONTAINERS.

Environmental precautions

Prevent further leakage or spillage if safe to do so.

Methods and material for containment and cleaning up

Methods for containment

Prevent further leakage or spillage if safe to do so. Cover with DRY earth, DRY sand or

other non-combustible material followed with plastic sheet to minimize spreading or contact

with rain.

Methods for cleaning up

With clean shovel place material into clean, dry container and cover loosely; move

containers from spill area. Use a non-combustible material like vermiculite, sand or earth to

soak up the product and place into a container for later disposal. Dike far ahead of liquid

spill for later disposal. Following product recovery, flush area with water.