MSDS

Concrobium Mold Stain Eraser
Revision Date: May 21, 2015
SDS: Concrobium Mold Stain Eraser
Page 3 of 10
Skin Contact:
Thoroughly wash exposed skin with soap and water. Remove any contaminated
clothing and wash before reuse.
Inhalation:
Remove to fresh air. If symptoms persist consult physician.
Ingestion:
Wash out mouth with water. Drink plenty of water. Do not induce vomiting unless
directed by medical personnel. Never give anything to an unconscious person. Get
medical aid.
Notes to Physician:
Treatment based on judgment of attending physician.
Most Important symptoms and effects, both acute and delayed: No information available
5. FIRE FIGHTING MEASURES
Suitable Extinguishing Media
Flood with water for extinguishing agent. CO2 may provide limited control.
Unsuitable Extinguishing Media
Do not use dry chemicals or foams.
Specific Exposure Hazards
Oxidizing substances can be decomposed by water and direct sources of heat.
Decomposition releases oxygen which can support combustion.
Hazardous Combustion Products
Carbon Oxides.
Explosion Data:
Sensitivity to Mechanical Impact:
None.
Sensitivity to Static Discharge:
None.
Special safety equipment:
Self-contained positive pressure breathing apparatus (MSHA/NIOSH approved or
equivalent) and full protective clothing.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment and Emergency Procedures:
General Measures: Do not get in eyes, on skin, or on clothing. Do not breathe dust.
Environmental Precautions:
Environmental Precautions: Prevent entry to sewers and public waters.
Methods and Material for Containment and Cleaning Up:
Method for Containment: Contain any powder spills with dikes to prevent migration and entry into sewers
or streams.
Methods for Cleaning Up: Clear up spills immediately with absorbent and dispose of waste safely.
Procedures for Non-Emergency Personnel:
Protective Equipment: Use appropriate personal protection equipment.
Emergency Procedures: Evacuate unnecessary personnel.