Use and Care Manual

CMC-US-2018
www.concrobium.com
Physical Properties and Hazard Rating
Information
Concrobium Mold Control is a patented solution
comprised of naturally-occurring salt compounds. The
proprietary solution dries to form an invisible polymer
that eliminates existing mold and prevents new mold
growth. In independent lab tests, Concrobium Mold
Control received the safest toxicity ratings possible
(Category IV).
Appearance: Clear liquid
Odor: Odorless
Boiling Range: 212°F / 100°C
Weight/US Gal: 8.5 lbs (3.9 kg)
Evaporation Rate: Slower than ether
Vapour Density: Heavier than air
pH: 11.1 – 11.5
Known or suspected carcinogens: None
HMIS/WHMIS Hazard Ratings
Health 0
Fire 0
Reactivity 0
Special 0
Ammonias: None
Chlorines: None
VOCs: None
Alcohols: None
Oral: No known hazards in normal use. LD50 >5000 mg/kg
Dermal: No known hazards in normal use. LD50 >5050 mg/kg
Eye Irritation: No known hazards in normal use. Non-irritating
Skin Irritation: No known hazards in normal use. Non-irritating
Inhalation: No known hazards in normal use. LC50 >2.28 mg/L
Sensitization: No known hazards in normal use. Not a sensitizer.
Regulatory and Product Testing Information
EPA Registration #: 82552-1
Method Description Results
ASTM Quantitative
Carrier Test
(QCT-2)
Fungicidal test against mold and fungi.
Challenge organisms: Aureobasidium
pullutans, ATCC 9348 and T.
mentagrophytes, ATCC 9533
Achieved >99.9% kill level. Meets
Health Canada requirement for
demonstrating fungicidal activity.
EPA Hard Surface
Mildew Fungistatic Test
EPA standard to validate efficacy of
product to control mold and fungal
growth on hard nonporous surfaces
including tiles, wood, drywall, plastic
and metal. Challenge organism:
Aspergillus niger, ATCC 6275
No growth on treated surfaces vs.
100% growth on control surfaces.
Meets EPA requirement.
EPA Fabric Surface
Mildew Fungistatic Test
EPA standard to validate efficacy of
product to control mold and fungal
growth on articles or surfaces
composed of fabric. Challenge
organisms: Aspergillus niger, ATCC
6275 and Penicillium variabile, ATCC
32333.
No growth on treated surfaces vs.
100% growth on control surfaces.
Meets EPA requirement.
ASTM D3273 Industry standard test to evaluate
efficacy of product to resist mold in
an environmental chamber. Challenge
organisms: Aureobasidium pullulans
ATCC 9348, Aspergillus niger ATCC
6275 and Penicillium citrinum ATCC
9849
Woven paper ...............No growth
Wood .............................No growth
Wood composite .......No growth
Drywall ..........................No growth