MSDS

Material Safety Data Sheet
Concrobium Mold Control
®
© 2013 Siamons International Inc. Page 2 of 4
SECTION IV: FIRST AID MEASURES
Eye Contact:
Immediately flush with water for 15 minutes, holding eyelids open during
flushing. If irritation persists, repeat flushing and obtain medical attention
immediately.
Skin Contact:
Flush with water. Seek medical attention if irritation persists.
Inhalation:
Move victim to fresh air. If conscious, have victim take deep, slow breaths.
Seek medical attention if symptoms persist.
Ingestion:
DO NOT INDUCE VOMITING. Drink one glass of water. Do not give
anything to victim if unconscious or convulsing.
SECTION V: FIRE FIGHTING MEASURES
Flammability:
Non flammable
Flash Point deg
(C,TCC) :
Not Applicable
Means of Extinction:
As appropriate for surrounding fire. Use water, dry chemical, carbon dioxide
or foam.
Special Fire
Hazards:
Fire fighters should wear self-contained breathing apparatus as for
surrounding fire.
Autoignition
temperature:
Not applicable.
Flame propagation
or burning rate of
solid:
Not applicable.
Sensitivity to static
discharge:
Not applicable
Unusual Fire and
Explosion Hazards.
None expected. As per surrounding fire.
Hazardous
decomposition
products:
Oxides of carbon.
SECTION VI: ACCIDENTAL RELEASE MEASURES
Recover usable material if possible. Non-recoverable material can be disposed of in accordance
with standard wastewater treatment methods.
SECTION VII: HANDLING AND STORAGE
Storage Requirements: Store containers between 4°C (39°F) and 38°C (100°F). If product
freezes, thaw and mix thoroughly.
Handling Requirements: No special handling requirements. Keep out of reach of children.
SECTION VIII: EXPOSURE CONTROL/PERSONAL PROTECTION
Gloves: Not normally required.
Eye Protection: Not normally required.
Respiratory Protection: Not normally required.
Other Protective
Equipment: Not normally required.
Engineering Controls: General ventilation normally required.