User manual

4 Power ON/OFF
4.1 Power ON
The terminal will be automatically on when you insert the SIM card into the SIM card slot. The
battery will connect the internal wires together in the terminal and the external power supply
will start providing power to the device and also charging the battery.
After the power is on, it will start searching the GSM and GPS signal. During this period, the green
indicator (GSM indicator) will be flashing while the blue indicator (GPS indicator) will be flashing
quickly. When the blue indicator is flashing slowly, it means GPS has located.
4.2 Power OFF
Pull out the SIM card, the terminal will be off.
5 Parameters setting
5.1 Set APN
Please inquire about the APN with your SIM card operator and send SMS command to the
number of terminal so as to set up the APN parameter. The terminal will reply “OK” automatically
after setting successfully.
Send SMS command: APN,APN’s name#
e.g: APN,internet#
NOTE: The APN of some countries have user name and password, you may need to send SMS
command as follows:
Send SMS command: APN,APN’s name,user name,password#
e.g: APN,internet,CLIENTE,AMENA#
5.2 Set DNS
Please send SMS command to the number of terminal so as to set up the DNS parameter. The
terminal will reply “OK” automatically after setting successfully.
Send SMS command: SERVER,1,DNS,Port,0#
e.g. SERVER,1,et100.szdatasource.com,8841,0#