User manual

Strona 8 z 12 rev. 1.0.2
USER MANUAL: GT06N GPS VEHICLE TRACKER
www.elmic.pl
,
[e-mail]
5. Delete specific number
Before deleting specific number, please check its corresponding code. For the code, please SMS “PARAM#” to the device.
SMS command to the device to delete the number.
SOS,D,serial NO.1,serial NO.2,serial NO.3#
“D” means to delete the number, for example:
SOS,D,1# means to delete the first number
SOS,D,3# means to delete the third number
If you want to delete more than one numbers, you can send this command:
SOS,D,1,3# means to delete the first and third numbers.
If you forget serial number of the mobile number you want delete, you can send this command:
SOS,D,mobile number# means to delete the mobile number directly.
For example:
SOS,D,13527852360# means to delete the 13527852360 directly.
After deleting the SOS number, it will receive “Delete number 135XXXXXXXX success! specific number total 2” for
successful deleting of the specific number.
6. Set the center number
If you want to cut off/restore oil by SMS command, you have to set a center number firstly. Only the center number can
send the cut off/restore oil command to the device. You can set your own mobile number as center number.
The command for setting center number is:
CENTER,A,mobile number#
For example:CENTER,A,15942703401#
If set successfully, there is an “OK” reply message.
NOTE
：
Only the SOS number can be used to set center number successfully.
7. Delete the center number
SMS command to the device to delete the center number.
The command is:CENTER,D#
For example:CENTER,D#
If set successfully, there is an “OK” reply SMS.
NOTE
：
Only the SOS number can be used to delete center number successfully.
Only SOS phone number can send this command successfully to set the center number. There is only one center number
can be set.
8. Check parameter setting
Send command to the terminal, you can check the parameter setting.
Command format: PARAM#
e.g.: PARAM#
Information replied:
IMEI: 353419032348877 ---IMEI number of the device;
GPRS Interval: 10,10; ---GPS data uploading Interval;
SENDS:5; --- the GPS working time when ACC is OFF;
SOS: 15942703401; --- SOS numbers, maximum 3 SOS numbers can be set and used for alarm and monitoring;
Center Number: 15942703401; ---only 1 center number can be set and used for cutting off /restoring oil command;
Sensoralm: 10,3,1,180 --- detect 3 vibrations in 10s; the alarm delay is 180s;
Defense time: 10; --- the defense delay is 10 minute;
TimeZone:E,8,0; --- set time zone; default as E8.
The replied information contains IMEI number, GPRS Interval, SENDS, SOS, center number, sensor time interval, defense
time and time zone.
9. Check GPRS parameters
SMS command format ： GPRSSET#
Eg ： GPRSSET#
Reply message ：
GPRS:ON //GPRS on/off status//
APN:CMNET,0,0.0.0.0,,; //APN setting information//
Server: 1,www.gpsluckly.com,0088,0; //platform information//
URL:http://maps.google.com/maps?q=; //preset web link setting information //