User manual

Strona 6 z 12 rev. 1.0.2
USER MANUAL: GT06N GPS VEHICLE TRACKER
www.elmic.pl
,
[e-mail]
3. Wiring configuration
Line No. Specification Color Instruction
1. 2 Keypod Orange / Orange Connect to SOS button
3. 4 MIC-,MIC+ Black / Red Connect to Microphone
5 TX Green Sending data (TX) / backup
6 RX White Receiving data (RX) / backup
7 GND Black Ground wire
8 MOTOR Yellow Connect to relay control line
9 ACC White Connect to ACC ignition
10 V- Black(thick) Negative side of 12V/24V
car storage battery.
11 V+ Red(thick)
4. Device wiring diagram
Notes of the relay wiring
The relay wiring of pump: oil connectors
of both ends are a fine white line (85) and
a fine yellow line (86). The fine white line (85)
is connected to vehicle positive power (+12V).
The fine yellow line is connected to the device
relay control line.
Cut off the positive connection line of the
pump; then connect in series to the relay N.C.
contact (thick green line 87a) and the other end
to relay COM contact (thick green line 30).
Please choose the right relay (12V-standard
/ 24V-optional) for the proper installation.