Operation Manual

_ iNSTALLiNG THE CONCOrD TrANSFOrMEr WiTH TWiNFiX

Incarswithstandardheadrests,thesemaybeadjustedorremovedtomakeiteasier

toinstallthechildcarseat.Pleasenotethatthecarheadrestsmustbereplacedand

re-positionedcorrectlywhenanadultistravellinginthecar.

ATTENTiON!

• TWINFIXisanadditionalfittingsystemforsecuringtheCONCORD

TRANSFORMER and is not suitable for securing a child.

•Childrenmustalwaysbesecuredbymeansofthecar’sthree-pointsafetybelt.

PulltheTWINFIXcentralstrap(08)

forwards and guide the CONCORD

TRANSFORMER back until it lies as

close/flushaspossibletothecarseat

backrest.

PushtheTWINFIXbutton(09) down

andsimultaneouslypulloutthe

TWINFIXadapters(10) on the back of

the child seat to their full extent.

Position the CONCORD TRANSFORMER facing forwards on

the vehicle seat or bench fitted with ISOFIX points.

PushbothTWINFIXadapters(10) on to the ISOFIX points

inthevehicleuntilthelockingmechanismshaveclicked

audiblyintoplace.