Specifications

7
Incorporating the Best-selling Inspection Items
from High-end Vision Systems
Edge Pitch
The number of edges in a region
can be counted.
Edge Position
This inspection item detects edges
and measures their positions.
Edge Width
This inspection item measures
the width between edges.
Edge Measurements
Search
This is a standard search inspec-
tion item. This type of search is used
to detect items like labels, identi-
fy shapes, or positions.
Detection of Promotional Stickers
Searching
Utility Items
Image Filters
A total of 11 different image filters are pro-
vided, including background suppression
to help eliminate patterns that can result in
unstable measurements, as well as dila-
tion and erosion.
360° Rotational Position Compensation
The correct position of workpieces with an inconsistent
orientation can be measured through automatic detec-
tion of the offset of the workpiece in relation to a regis-
tered standard model.
Calibration
If the dimensions or position of a work-
piece is difficult to determine in a pixel
display, you can convert the display unit
so that it is easier to see.
150 pixels 8 mm
With Background
Suppression
Without Background
Suppression
Shape Search II Sensitive Search
Through automatic division and match-
ing of the model image, tiny differ-
ences that cannot be detected with a
normal search can be detected with
large numerical differences.
General searches have a difficult time with overlap or
360° rotation, but this Sensor achieves high-speed,
stable searching of any shapes that match the model.
Searching
OK
NG
One character is missing.
Multiple searches can be performed simultaneous-
ly, which enables the inspection of the number of
items in a pallet or picking applications.
3
5
4
0
6
8
1
7
2
0
4
1
5
Workpieces are
detectable even
if they are rotated
up to 360°
Deformed, faulty
products are judged
as NG.
Workpieces
are detectable
even if there
is overlapping.
Workpieces are detectable
even with different amounts
of light.
Ten Times Faster Than Previous Searching
You can also inspect for defects
and foreign matter by looking
at the color deviation.(color de-
viation)
Labeling
This inspection item counts how
many labels there are of the spec-
ified color and size and measures
the area or center position of the
specified label.
Area
This inspection item measures
the area and center position of
the specified color.
Color Data
Inspections can be performed that com-
pare the difference in color between the
workpiece and a registered image of a
good product to detect objects and for-
eign matter.(average color value)
Area Measurements, Color Measurements, and Defect & Foreign Matter Detection