Specifications

5
Quick and Easy Design and Installation
All you need to do is select the camera based on the field of view and installation distance that you require. There is no need to select and
purchase additional lighting or lenses. Furthermore, the time required to wire everything has been drastically reduced due to the low
number of components.
Easy Product Selection
Controller
Console
Camera
Lighting
Power supply of lighting
Lens
Sensor
Monitoring and Setup Tool
Touch Finder or PC Tool
Monitor
Vision Systems FQ2-series Smart Cameras
7
or
more
components
Only
2
Sensor
Just install the Cameras where you need them. No control panels are required to house the controllers. Triggers can be input for each
Camera, so new Cameras can be added whenever required without having to worry about timing input design. Up to 32 Cameras can be
set up from a single Touch Finder, so you also do not need to worry about adding new monitors when you need more Cameras. This also
allows you to smoothly respond to user requests for additional features.
Easy Expansion
Current Vision Systems FQ2-series Smart CamerasCurrent Vision Syste
ms
A separate controller is
needed to add a
new camera.
FQ2-series Smart Camer
as
Triggers
Up to 32 Cameras
Connect up the
32
Cameras
and remove them as
required after setup.
The camera and lighting have been integrated into a single unit, so only one camera mounting bracket is required. The Sensor comes with
a multi-directional mounting bracket that can be attached on any of the four sides of the Camera. Axis alignment is also not required be-
cause the lighting and the camera are integrated into a single unit.
Easy Installation
Standard Vision Cameras FQ2-series Smart Cameras
Multi-directional Mounting Bracket
1 Mount camera.
2 Mount lighting.
3 Align the optical axes.
Only one mounting bracket
1
2
3
The optical axis must be adjusted
because of two components
are mounted.