Specifications

10
High-speed Image Processor
Partial Input with DAP (Dual Axis Partial) Processing
With our new high-speed image processor we are able to
achieve a processing time of 50 ms or less for all primary in-
spection items.
20 Inspection Items per Second Processing Time
Hardware Advancements
Processing time can be further reduced by limiting the
camera input to only the area that is required for inspec-
tion. Previous models allowed trimming only in the Y di-
rection, but now you can specify a range across both the
X and Y axes for trimming. Keep a wide field of view and
trim to only the sections that are required for inspection
in each scene to reduce processing time.
[ Problems with a Standard Digital Zoom ]
Camera input is performed for all images and only a portion is shown en-
larged, so this does not decrease the amount of time required for
camera input.
Workpiece A
Workpiece B
Partial input allows you to input only the portion of
an image that is required for inspection by changing
scenes, without having to change the field of view.
You can enlarge the display of the partial input image.
Note: DAP processing is available only on FQ2-S3-series Sensors.
High-speed
Image Processor
Partial Input Enlarged Display
Field of
View Y
Field of View X
Partial Input Y
Partial
Input X
20ms
40ms
60ms
80ms
100ms
110 ms
30 ms
22 ms
FQ-S
Color Image
FQ2-S
Color Image
FQ2-S
Monochrome Image
Note: This comparison was conducted with a 752
×
480 pixel image,
with no rotational compensation.
* Processing may take longer than 50 ms depending on the settings.
Search Inspection Speed Comparison
30
ms
m
1/3
1/3
1/5
1/5
1/3 1/5
1,000x
improvement
3X
Faster than Previous Models