user guide digital camera

GETTING STARTED (CONTINUED)

TURNING THE CAMERA ON AND OFF

• To turn your camera on, press the POWER

button ❶; the LCD screen will turn on and two

beeps will be heard.

• To turn your camera off, press the POWER

button ❶ again; the LCD screen will turn

blank.

SPECIAL NOTE ON TURNING YOUR CAMERA OFF: While the camera is

processing your pictures, pressing the power button will not shut down the

camera immediately. The camera will shut down automatically when it has

finished processing.

STANDBY: To save the batteries, when no button is pressed within 60

seconds, the unit will enter the Standby mode (LCD will turn off); images will

be stored in memory.

BUILT-IN MEMORY/INSERTING A COMPACTFLASH

MEMORY CARD

Your camera comes with 8MB of internal memory, of which 2MB are used for

storing images. If this is not enough, you can insert a CompactFlash

memory card (not included), up to a maximum of 64MB. CompactFlash

memory cards are available at all good computer and camera retailers. To

insert, follow the instructions below:

Using your fingernail, open the

CompactFlash

Card Compartment

on the side of your camera and insert

the memory card all the way into the

compartment as shown above. The

card will only fit in the compartment

one way.

To eject the card, open the

CompactFlash

Card

Compartment and then press the

EJECT button ❶ as shown above.

Instr. Manual M1 (English) 26/10/01 11:38 am Page 13