- Concord Digital Camera User's Guide 3103

Preparing to Take Pictures

Power Save Settings

You may perform power save settings while in any Mode.

( )

1. Press the Menu button.

2. Then press the RIGHT button until the SETUP MENU ( )

appears.

3. Press the DOWN button ( ) to POWER SAVE.

4. Press the SET button to enter the POWER SAVE menu.

5. Press the UP/DOWN buttons to adjust the setting.

6. Press SET again to confirm your setting.

Note: The default setting is “1 minute”.

1 minute: The LCD screen on this camera will automatically turn off if there

is no activity for one minute. Pressing any button will illuminate

the LCD.